ATX Mid Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
- USB 3.2 Type-A
- USB 2.0 Type-A
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
390 mm / 15.354"
External 5.25" Bays
Internal 2.5" Bays
Internal 3.5" Bays
- 38 points
- 31 months ago
from completed build 32 Thread Monster (Dual Xeon Build)
To fit all my computer components, I looked for a cheap but well designed case that had a side window. After picking this case up for $65 after taxes, I was pretty happy overall. Its not the best case but it gets the job done, and with having two cats, the included intake filters were an amazing extra.
- 22 points
- 40 months ago
from completed build First PC build (seeking input)
Other than a CPU cooler clearance issue, I love this case. Love the PSU shroud and personally I love the simple, clean lines look. Just keep in mind the CPU clearance. It can get tight.
- 15 points
- 17 months ago
from completed build "Budget" Ryzen Build
Although it's a good budget case and all... I don't like building in this.
I have trouble installing one fan, installing the motherboard and securing the motherboard to the PCI slot due to misalignment issues. Well, not sure if it's just me or the actual case but, yeah, I don't like building this overall.
Although I do appreciate the PSU dust filter, I'm starting to think the front dust filter is not effective at all...
If I were to choose another case, I would choose either the (old) NZXT S340, the Phanteks P400, the NZXT H500 or the Corsair Carbide 400C.
- 14 points
- 18 months ago
from completed build First Build (Blood Raven M1)
This is a pretty cheap case, but it's still get the job done. It even has a PSU shroud, which most budget cases don't have. Note that the side panel isn't glass, it's acrylic, which I heard scratches easily, but I haven't had any problems with it. Just be safe and wipe it down with a microfiber cloth when cleaning it though. The back side panel is dented so it gives more room for cable management, which is good because I barely got it one after finishing the build lol!
- 11 points
- 25 months ago
from completed build JDAR71070 (JdogAwesome Ryzen 7 1070)
What a case, I love it and everything about it! The main feature and reason I bought it was the PSU cover which makes all the difference in the world for how clean your build looks. The front door is super useful because you can still have the external bays for optical drives or in my case a fan controller but you dont see it from the front constantly because of the door. Overall its been my favorite case to work in and I would highly recommend it.
EDIT: 2.5 Years later and this case is STILL kicking! Looks brand new and has had pretty much two entire rebuilds inside of it, can't recommend enough!
- 9 points
- 32 months ago
from completed build Future proof overkill build
Love the look of the case, and it was super easy to build in as well. It would get insanely hot (the pc parts and the case itself) until I put 3 exhaust fans. Front panel is a pain to get off but I rarely need to do that. Taking off the top panel during games decreases temps by around 7 degrees in my experience.
- 9 points
- 1 month ago
from completed build Extrodius Lv.5
Good looking clean case with a big side window, and for a good price. Only negative thing is that half the clips for the front panel broke off when I removed it to install a fan. Decided I wasn't going to install my fan there, put the panel back on, and I'm never taking it off again lol
- 8 points
- 32 months ago
from completed build First PC Build
Wanted a case with Side Window. This was it. PSU shroud and LED strip were the deciding factors. I don't like the front panel door. Have to keep it open in order for the front fan to work properly. Otherwise it's a good case and plenty of drive bays.
- 7 points
- 30 months ago
from completed build RYZEN 5 1600 BUILD
Is good for cable management, very roomy, and very upgradeable. I am taking off one star because the front panel USB 3.0 does not work. EDIT: USB 3.0 front panel does work. The cable that connects the 3.0 port to the motherboard is daisy chained usb 2.0 and usb 3.0 , I plugged them both in, but i removed the usb 2.0 portion and now the usb 3.0 works. Giving 5 stars
- 7 points
- 29 months ago
from completed build April - My first build!
My overall experience with this case was well... pretty abismal. I first got it with ever plastic peg on the thing broken off. The 2nd one i got was fine but if you take off the front panel, there is hot glue everywhere and fan installation is quite tricky. Other than that, It was fine.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters